Panasonic F77G User Manual page 360

Chapter 11 Serial Interface 0, 1
Serial Interface 0 Pins Setup (3 channels, at transmission / reception)
Table 11-3-8 shows the setup for synchronous serial interface pin with 3 lines (SBO0 pin, SBI0 pin, SBT0
pin) at transmission / reception.
Table 11-3-8
Setup item
Port Pin
Port Pin Setup
SBI / SBO pin Setup
Function
Style
I/O
Pull-up (Pull-down) setup
Note) Select pull-up/down resistor with P7RDOWN flag of FLOAT register (x'03F2E')
[ Chapter4, 4.7.2 Register ]
XI - 34
Operation
Setup for Synchronous Serial Interface 0 Pin
(3 channels, at transmission / reception)
Data input pin
SBO0A pin/
SBO0B pin
P03/P70
SBI0/SBO0 independent
SC0MD1 (SC0IOM)
Serial data output Serial data input
SC0MD1(SC0SBOS) SC0MD1(SC0SBIS)
Push-pull/
Nch open-drain
SC0ODC (SC0ODC)
SC0ODC (SC0ODC3)
Output mode
P0DIR (P0DIR3) P0DIR (P0DIR4)
P7DIR (P7DIR0) P7DIR (P7DIR1)
Add/Not Add
P0PLU (P0PLU3)
P7PLUD (P7PLUD0)
SBI0A pin/
SBI0B pin Internal clock
P04/P71
Select used pin (A, B)
SC0ODC (SC1SEL)
Serial clock I/O
Push-pull /
Nch open-drain
-
Input mode Output mode
Add/Not Add
-
Clock I/O pin
SBT0A pin/SBT0B pin
External clock
P05/P72
-
Serial clock I/O
SC0MD1 (SC0SBTS)
Push-pull /
Nch open-drain
SC0ODC (SC0ODC1)
Input mode
P0DIR (P0DIR5)
P7DIR (P7DIR2)
Add/Not Add
P0PLU (P0PLU5)
P7PLUD (P7PLUD2)