Chapter 18
Flash EEPROM
18-5
In PROM writer mode, the CPU is halted for Internal flash EEPROM to be programed. The
microcontroller is inserted into a dedicated adaptor socket, which connects to a PROM writer. When the
microcontroller connects to the adaptor socket, it automatically enters PROM writer mode.
For programming using our PanaX Flash writer, you need dedicated adapter socket and gender
changer. The P/N are as follows.
Adaptor socket: FLS64LF14-101CF77-3
Matching information of the dedicated writer is posted on our semiconductor website, which is listed on the
last page of this manual.
Fixing a device in the adapter socket and the position of the No.1 pin.
P/N: FLS64LF14-101CF77-3
Figure 18-5-1
XVIII - 10
PROM writer mode
PROM writer mode
Set the No.1 pin of the
device to this position.
Fixing a Device on the Adapter Socket and the Position of No.1 Pin
No.1 Pin