Panasonic F77G User Manual page 303

8-2-2 Programmable Timer Registers
Timer 6 is a 8-bit programmable counter.
Programmable counter consists of compare register (TM6OC) and binary counter (TM6BC).
Binary counter is a 8-bit up counter. When the TM6CLRS flag of the timer 6 mode register (TM6MD) is
"0" and the interrupt cycle data is written to the compare register (TM6OC), the timer 6 binary counter
(TM6BC) is cleared to x'00'.
Timer 6 Binary Counter (TM6BC)
7
TM6BC TM6BC7 TM6BC6 TM6BC5 TM6BC4 TM6BC3 TM6BC2 TM6BC1 TM6BC0
Figure 8-2-1
Timer 6 Compare Register (TM6OC)
7
TM6OC TM6OC7 TM6OC6 TM6OC5 TM6OC4 TM6OC3 TM6OC2 TM6OC1 TM6OC0
Figure 8-2-2
Time base timer cannot stop counting but the software can reset its operation. Time base timer can be
cleared by writing an arbitrary value to the time base timer clear control register (TBCLR).
Time Base Timer Clear Control Register (TBCLR)
7
-
TBCLR
Figure 8-2-3
6 5 4 3
Timer 6 Binary Counter (TM6BC : x'03F68', R)
6 5 4 3
Timer 6 Compare Register (TM6OC : x'03F69', R/W)
6 5 4 3
- - - -
Time Base Timer Clear Control Register (TBCLR : x'03F6B')
Chapter 8 Time Base Timer / 8-bit Free-running Timer
2 1 0
( At reset : X X X X X X X X )
2 1 0
( At reset : X X X X X X X X )
2 1 0
- - -
(For writing only)
VIII - 5
Control Registers