Table of Contents
Advertisement
Quick Links
Function Board for 12G-SDI Optical Commercial Use
Thank you for purchasing this Panasonic product.
■ Before using this product, please read these "Operating Instructions" and
the "Operating Instructions" of the projector carefully and save the manuals
for future use.
■ Before using this product, be sure to read "Read this first!" ( x page 3).
Operating Instructions
Model No.
TY-SB01FB
ENGLISH
FRANÇAIS
日本語
ENGLISH
DPQX1679ZA/X1
Advertisement
Table of Contents
Related Manuals for Panasonic TY-SB01F
Summary of Contents for Panasonic TY-SB01F
- Page 1 Model No. ENGLISH FRANÇAIS 日本語 Thank you for purchasing this Panasonic product. ■ Before using this product, please read these “Operating Instructions” and the “Operating Instructions” of the projector carefully and save the manuals for future use. ■ Before using this product, be sure to read “Read this first!” ( x page 3).
-
Page 2: Table Of Contents
Contents Contents Read this first! Precautions for use Supported projector Supported SFP module Handling of the product Disposal Accessories Part names and functions Installing the Function Board Before installing or removing the Function Board How to install the Function Board How to remove the Function Board Installing the SFP module How to install the SFP module... -
Page 3: Read This First
Read this first! Read this first! WARNING: Do not spill water on this product or allow this product to get wet. Doing so may cause electric shock, fire, or malfunction due to short circuit or overheating. f Do not place a container with liquid close to this product. f Consult your dealer when liquid such as water is spilled on this product. -
Page 4: Precautions For Use
SFP (Small Form-Factor Pluggable)/SFP+ module (referred to as “SFP module” hereinafter). By installing this product to the projector manufactured by Panasonic Connect Co., Ltd., long-distance transmission of the SDI signal via optical fiber cable will be possible without a separate converter to convert from optical signal to electric signal. -
Page 5: Supported Sfp Module
The SFP module that the operation has been verified with the projector manufactured by Panasonic Connect Co., Ltd. can be confirmed from the following URL. https://panasonic.net/cns/projector/ Confirmation of operation for SFP module from other manufacturer has been performed with the items set independently by Panasonic Connect Co., Ltd.,... -
Page 6: Disposal
Precautions for use Disposal To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Accessories Make sure that the following accessories are provided with the product. Numbers enclosed in < > show the number of accessories. Port cover <2>... -
Page 7: Part Names And Functions
Precautions for use Part names and functions SDI OPT 1 IN 2 IN SIGNAL TY-SB01FB 12G/3G/HD SFP port 1 Input indicator <SIGNAL> This is the port to install the SFP module This is the indicator to indicate the for receiving. detection state of the video signal. -
Page 8: Installing The Function Board
Installing the Function Board Installing the Function Board Requesting a qualified technician to install or remove the Function Board to the projector is recommended. A malfunction may occur due to static electricity. Consult your dealer. Before installing or removing the Function Board f Always turn off the power of the projector before installing or removing the Function Board. -
Page 9: How To Install The Function Board
Installing the Function Board How to install the Function Board Screws (two locations) Slot cover Fig.1 Screws (two locations) Guide rail Fig.3 Fig.2 Remove the slot cover. (Fig. 1) f Remove the two screws fixing the slot cover of the projector by rotating counterclockwise with a Phillips screwdriver. -
Page 10: How To Remove The Function Board
Installing the Function Board How to remove the Function Board Handles Fig.1 Remove the Function Board. (Fig. 1) f Remove the two screws fixing the Function Board by rotating counterclockwise with a Phillips screwdriver. The removed screws are used to fix the slot cover. f Hold the handle of the Function Board and remove it slowly. -
Page 11: Installing The Sfp Module
Installing the SFP module Installing the SFP module This section explains an example of a procedure to install and remove the SFP module. Please also check the operating instructions and setup guide of the SFP module to be installed. How to install the SFP module SFP ports SFP modules Circuit boards... -
Page 12: How To Remove The Sfp Module
Installing the SFP module How to remove the SFP module Lever Lever Latch SFP modules Fig.1 Fig.2 Disconnect the optical fiber cable. f If the optical fiber cable is connected to the SFP module, remove the cable while releasing the latch of the optical fiber cable. Release the latch of the SFP module. -
Page 13: Connecting Example
Connecting example Connecting example 12G‑SDI signal output compatible device Optical fiber cable HD-SDI signal 3G‑SDI signal 12G‑SDI signal SDI OPT 1 IN 2 IN SIGNAL TY-SB01FB 12G/3G/HD SDI ‑ optical converter SDI OPT 1 IN 2 IN SIGNAL TY-SB01FB 12G/3G/HD Note f Prepare the commercially available SFP module and the optical fiber cable required for connection according to the usage, video signal to be input, specification of the external... -
Page 14: Specifications
For the video signals supported by this Function Board, refer to the Operating Instructions of your projector. The video signal that the projector can actually display differs depending on the SFP module installed in the SFP port. The Operating Instructions of your projector can be found on the following URL. https://panasonic.net/cns/projector/ 14 - ENGLISH... - Page 15 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Importer: Panasonic Connect Europe GmbH Hagenauer Strasse 43, 65203 Wiesbaden, Germany English Authorized Representative in EU: Panasonic Connect Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Производител: Panasonic Connect Co., Ltd. 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Япония...
- Page 16 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japón Importador: Panasonic Connect Europe GmbH Hagenauer Strasse 43, 65203 Wiesbaden, Alemania Español Representante Autorizado para la UE: Panasonic Connect Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburgo, Alemania Fabriqué par : Panasonic Connect Co., Ltd.
- Page 17 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Importeur: Panasonic Connect Europe GmbH Nederlands Hagenauer Strasse 43, 65203 Wiesbaden, Duitsland Bevoegde vertegenwoordiger in de EU: Panasonic Connect Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Duitsland Produsert av: Panasonic Connect Co., Ltd.
- Page 18 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japonsko Dovozca: Panasonic Connect Europe GmbH Slovenčina Hagenauer Strasse 43, 65203 Wiesbaden, Nemecko Autorizovaný zástupca v EÚ: Panasonic Connect Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Nemecko Proizvaja: Panasonic Connect Co., Ltd. 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japonska Uvoznik: Panasonic Connect Europe GmbH Slovenščina...
- Page 19 MEMO ENGLISH - 19...
- Page 20 Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Importer for UK: Panasonic Connect UK, a branch of Panasonic Connect Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Product Information (for Turkey only) AEEE Yönetmeliğine Uygundur. Environment care information for users in China This symbol is only valid in China.
Need help?
Do you have a question about the TY-SB01F and is the answer not in the manual?
Questions and answers