Electronic Board Operating Instructions UB-5310 [Stand (option)] [Wall-mounting] Model No. Stand kit is optional. English ....1–28 Français ....29–56 Deutsch .
Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Record these items for future reference Model number: _________________________ Date of purchase: ________________________ Serial number: _________________________ Dealer’s name: __________________________ Dealer’s address: ______________________________________________________________________...
The product should be used only with the power cord cover is obtained. A replacement fuse cover can be that is supplied by the manufacturer. purchased from your local Panasonic Dealer. Stop operation immediately if your product emits If the fitted moulded plug is unsuitable for the socket...
Precautions Never remove the cover, take apart or modify the Do not position the electronic board in a location where product. This will void the warranty. it is unstable. Do not put drinks, other liquids or heavy items on the After installing or moving the electronic board, lock the tray or screen.
Precautions Have the unit installed, removed and CHOKING HAZARD disposed of only by qualified service Keep the marker’s cap out of reach of personnel. children to prevent swallowing. When the unit will no longer be used, in order to prevent it from falling, do not leave the unit installed, but remove it.
• Use a shielded USB cable that is certified as logo by USB-IF. • If you connect the electronic board to a USB hub, it is not guaranteed to work. • Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable.
Part Names and Functions Scanner Screen Film Printer Tray Stand The stand is optional. Output Port Control Panel (See page 9 for details.) Power Switch USB Connector (See page 16.) AC Inlet Printer Door Open this door to load Power Cord copy paper or to remove jammed paper.
Part Names and Functions ■ Control panel Advance Key Contrast Indicator Copy Key Contrast Key Multi-Copy/Stop Key 2-Screen Copy Key Multi-Copy/Error Indicator Panel Name Description This lamp indicator displays the printing contrast used during copying. Contrast Indicator off: Normal printing contrast Indicator Indicator on: Darker than normal printing contrast Each time this key is pressed, the unit will alternate between...
Loading Copy Paper Turn the power switch on by pressing the “ I ” side of the power switch. • The unit is ready for use when “ ” is displayed on the multi-copy/error indicator. Power Switch • The screen will move to home position and stop. Push the door open button and open the printer door.
Making Copies This section describes how to copy text and illustrations drawn on the screen. Turn the power switch on by pressing the “ I ” side of the power switch. • The unit is ready for use when “ ”...
Making Copies ■ Copy types and procedures Copy Type Procedure Copying the front of Press the screen Copying the back of Press to move the screen to be copied to the front. the screen Press Making multiple Select the number of copies (1 to 9) by pressing copies (up to 9) necessary.
Paper Jams To release jammed paper: Push the door open button and open the printer door. Door Open Button Remove the jammed paper by pulling the paper roll to the direction A. If the jammed paper is still in the cutter cover, remove it using tweezers from slot B.
Screen Height Adjustment The screen can be adjusted at 3 levels except for the lowest level. The lowest level of the board attachment frame is designed for installation of the screen, so the printer cannot be attached at this level. Adjust the level of the screen unit as follows.
Screen Height Adjustment Tighten the height adjustment handles. Height Be sure to tighten the height adjustment handles adjustment handles firmly after adjusting the level of the screen. Height adjustment handles Store the step frame by hanging it on the board Step frame attachment (upper).
Speed USB 2.0, this electronic board functions with it is not guaranteed to work. Full Speed USB 2.0. • Do not connect two or more Panasonic electronic Microsoft® Windows® 98 operating system boards to a computer. It may cause the computer (hereafter Windows 98) operation to become unstable.
Computer Interfacing ■ Installing Drivers / Board Image Read “End-User License Agreement” carefully Capture and click [Yes]. When the following window appears, check The USB, printer, TWAIN driver and Board Image that the electronic board is not connected to Capture are installed in your computer by following your computer and click [OK].
For Windows 2000 / Windows XP / Windows Vista / Windows 7: Quick Image Navigator For Windows 98 / Windows Me: Panasonic-DMS If Panasonic-DMS is already installed, you do not need to uninstall it. Power on your computer and start Windows.
Panasonic Quick Image Navigator. Follows the instructions on the screen. After uninstalling, restart your computer. ■ Removing Panasonic-DMS If you need to remove Panasonic-DMS, perform the following steps. Power on your computer and start Windows. Click [Start], move the pointer to Programs–...
Note • Board Image Capture cannot be started while the Panaboard Operation Panel is displayed using Quick Image Navigator or Panasonic-DMS. To start Board Image Capture, click [Close] in the Panaboard Operation Panel window, then start Board Image Capture.
• For more information about Document TWAIN tab, then click Select TWAIN- Manager, refer to the Panasonic-DMS compliant scanning device..operating instructions. For Panasonic-DMS: Click the File menu, then click Select source..Note Select Panaboard UB5-7 USB TWAIN Driver and click [Select].
Computer Interfacing ■ Panaboard Operation Panel It is possible to perform the same operations as with the electronic board control panel (page 9) from the following Panaboard Operation buttons. Note • While the Panaboard Operation Panel is displayed, the Copy Key and 2-Screen Copy Key on the electronic board control panel are used for scanning images into the computer.
Computer Interfacing Panel Name Description The status box displays the status of the TWAIN driver and the electronic board. Stand by: The electronic board is stand by. Both of the Panaboard Operation Panel and the electronic board control panel are operational. Rotating: The electronic board is rotating the screen.
Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning outside and inside the unit. ■ Cleaning the screen and the unit Gently wipe the screen film and unit with a water- dampened cloth that has been thoroughly wrung. Notes •...
Daily Care and Maintenance Clean the Printer Head Dampen the tip of a cotton swab in ethyl alcohol and gently wipe the printer head. Note • Never touch the printer head or the surrounding area with your hands as this may disable copying. Printer head (Gold) Cotton swab Clean the Paper Feed Roller...
Install the new Panasonic-DMS again as follows. menu or cannot be used after 18-19 1. Uninstall the current Panasonic-DMS. installing the Panasonic- 2. Install the old Panasonic-DMS. DMS. 3. Install the new Panasonic-DMS in the same folder with the old one.
Troubleshooting Symptom Care and Remedy Page The old Panasonic-DMS is not uninstalled if the old version of the Panasonic Document Panasonic-DMS has been installed before installing the new one. Management System menu Uninstall the old Panasonic-DMS from the Add / Remove is remained in the Programs Programs of the Control Panel.
Specifications Model No. UB-5310 Power supply Refer to the name plate on the printer Power consumption Refer to the name plate on the printer (Operational) 1440 mm × 1372 mm × 233 mm External dimensions (Height × Width × Depth,...