Potential Failure Scenarios And Repair Actions; Administering Ip Services - Avaya G450 Installing And Upgrading

Power supplies and adjunct systems
5. Look at the port that the adjunct is connected to and see if there is any traffic.
If not, check all your connections and administration fields.
** Administrator **
1. port1
2. port 2
3. port 3
4. port 4 modem
REM <unknown>
LOG
___________________________________________________________________________
Press <RETURN> to see list of options.
IOLAN PLUS v4.02.00 a CDi
After you have successfully administered and validated the connection between the adjunct and
the S8300 Server through the IOLAN+, you can disconnect the laptop or other PC from the
IOLAN+. No further IOLAN+ administration is required.

Potential failure scenarios and repair actions

If a link goes down between the terminal server and the switch, you must reboot the terminal
server for the link come back up. If you are performing a software upgrade or if a system reset
occurs, you must reboot the terminal server to restore the link. See
page 252 for instructions.

Administering IP services

For each adjunct that you connect using TCP/IP, you need to administer IP services to establish
the IP address/TCP port pairing. The IP address is associated with the node name that you just
administered. In this example, we are administering the primary call detail recording (CDR)
connection as end-to-end TCP/IP.
1. Type change ip-services and press ENTER to assign the CDR endpoint.
256 Installation and Upgrades for the Avaya G450 Media Gateway
SERVER STATISTICS
Talking to host 172.22.22.67.5111<DSR+CTS+DCD >DTR+RTS
SERVER STATISTICS
waiting for DSR or DCD
waiting for DSR or DCD
logged out
logger not enabled
Terminal: 2
<DSR+DCD >DTR+RTS
>DTR+RTS
>DTR+RTS
iolan-st
Rebooting the IOLAN+ on