2. Shift fork thickness must be within specifica-
tions.
MEASURING SHIFT FORK GROOVE
(Width)
1. Using a calipers, in turn measure the width of
each shift fork groove.
2. Shift fork groove width must be within specifi-
cations.
MEASURING SHIFT FORK TO
GROOVE (Side Clearance)
1. In turn, insert each shift fork into its groove.
2. Using a feeler gauge, measure the clearance
between the shift fork and the groove.
Back
3-44
CC296D
CC288D
CC292D
Back to TOC
3. Shift fork to groove side clearance must be
within specifications.
Servicing Right-Side
Components
NOTE: Whenever a part is worn excessively,
cracked, damaged in any way, or out of tolerance,
replacement is necessary.
PRIMARY CLUTCH ASSEMBLY
(Inspecting/Measuring/
Assembling)
NOTE: Prior to inspecting and measuring com-
ponents, it is recommended that all components
be removed from the primary gear assembly and
be cleaned.
NOTE: When removing components from the pri-
mary gear assembly, account for the bushing that
fits into the primary gear.
Inspecting/Measuring Clutch
Driven Plate Warpage
1. Inspect each driven plate for warpage and burn
marks.
2. In turn place each driven plate on the surface
plate; then using a feeler gauge, measure
warpage in several locations.
Back to Section TOC
CC239D
Next