Arctic Cat 400 Service Manual page 498

INSTALLING
KEY
1. Brake
Assy
2. Screw
3. Cover
4. Screw
5. Clamp
6. Master Cylinder
7. Brake Lever Assy
8. Brake Lever Lock
9. Pin
10. Brake Switch
11. Crush Washer
12. Oil Bolt
1. Position the brake housing on the handlebar.
Secure with clamp screws; then tighten securely.
Back
0739-479
AG924
Back to TOC
2. Install the brake hose on the master cylinder.
Tighten to specifications.
3. Gently press the brakelight switch into the hous-
ing (left to right) until the mounting tabs snap
into the four locating holes; then install the
brake lever, pivot pin, and circlip.
4. Bleed the brake system (see Section 2).
Back to Section TOC
AG929
BC206
9
Next
9-3