Arctic Cat 400 Service Manual page 206

2. If damaged, the camshaft must be replaced.
Servicing Left-Side
Components
RECOIL STARTER
KEY
1. Recoil Starter Assy
2. Rope Assy
3. Spiral Spring
4. Reel
5. Ratchet Assy
6. Nut
7. Cap Screw
8. Nut
9. Starter Cup
10. O-Ring
11. O-Ring
12. Spacer
13. Oil Seal
14. Bearing
Removing/Disassembling
1. Remove the cap screws securing the recoil
starter assembly to the left-side cover; then
remove the starter.
Back
3-162
CF061A
CF060A
0737-764
Back to TOC
! WARNING
During the disassembly procedure, continuous
downward pressure must be exerted on the reel
so it does not accidentally disengage and cause
injury.
2. Rotate the reel counterclockwise until the notch
of the reel is near the rope guide in the case.
Guide the rope into the notch and slowly allow
the reel to retract until all spiral spring tension is
released.
! CAUTION
During the disassembly procedure, make sure all
spring tension is released before continuing.
3. Remove the nut.
Back to Section TOC
CC039D
B600D
B601D
Next