Arctic Cat 400 Service Manual page 444

8. Install the proper shim onto the ring gear spider
assembly making sure the chamfer side of the
shim is facing toward the ring gear. Install the
ring gear in the housing; then install the outside
shim with the chamfer side of the shim toward
the ring gear.
NOTE: The spider and ring gear assembly must
be replaced as a complete unit.
Back
CD103
CD110
CC896
Back to TOC
9. Install the left bearing housing aligning the
match mark to the mark on the differential hous-
ing.
10. Install the differential lock assembly into the
bearing housing; then place the O-ring on the
gear case housing.
Back to Section TOC
CC897
KX178
6
KX177
Next
6-15