Arctic Cat 400 Service Manual page 177

19. Secure the shift rod to the engine with a new
E-clip.
20. Install the front and rear body panels; then install
the front and rear racks (see Section 8).
21. Install the left-side foot peg to the footrest.
Tighten securely.
Back
CD785
CD793
CD774
Back to TOC
22. Connect the hose to the fuel pump; then connect
the vacuum hose and secure with hose clamps.
23. Place the storage compartment into position;
then install the reinstallable rivets.
24. Place the battery into position in the battery
compartment; then install the battery cables and
vent hose. Secure with the battery cover.
! CAUTION
Battery acid is harmful if it contacts eyes, skin, or
clothing. Care must be taken whenever handling a
battery.
25. Add proper amounts of engine/transmission oil.
26. Install the seat.
Back to Section TOC
CD782
3
CD766A
Next
3-133