Arctic Cat 400 Service Manual page 278

4. Remove the 4th driven gear from the driveshaft.
Note the four small dogs facing toward the 3rd
driven gear for assembling purposes.
5. Remove the 3rd driven circlip; then remove the
3rd driven lock washer (right side) from the
driveshaft.
Back
3-234
CC508D
CC219D
CC216D
Back to TOC
6. Remove the 3rd driven gear from the driveshaft.
7. Remove the 3rd driven bushing from the drive-
shaft. Note the location of the oil feed hole in
the bushing and the matching oil supply hole in
the driveshaft for assembling purposes.
8. Remove the 3rd driven lock washer (left side)
from the driveshaft. Note the tabs facing toward
the 5th driven gear for assembling purposes.
Back to Section TOC
CC215D
CC214D
CD248
Next