Arctic Cat 400 Service Manual page 287

7. Install the reverse idle shaft with circlip making
sure the oil hole in the shaft is facing downward;
then install a washer, bushing, reverse idle gear,
and a washer.
8. Place each of the four shift forks into its respec-
tive gear or dog as noted during disassembling;
then install the gear shift cam.
Back
CD232A
CF055
CC231D
Back to TOC
9. Engage the four forks to the gear shift cam; then
install the reverse shift cam and spacer.
10. Install the two gear shift shafts; then verify that
the two crankcase half alignment pins are in
place.
Back to Section TOC
CC107D
3
CC106D
CC105D
CC103D
Next
3-243