Arctic Cat 400 Service Manual page 96

7. Remove the 3rd driven bushing from the drive-
shaft. Note the location of the oil feed hole in
the bushing and the matching oil supply hole in
the driveshaft for assembling purposes.
8. Remove the 3rd driven lock washer (left side)
from the driveshaft. Note the tabs facing toward
the 5th driven gear for assembling purposes.
9. Remove the next 3rd driven lock washer (left
side) by rotating it out of the groove. Note the
groove closest to the 5th driven gear for assem-
bling purposes.
Back
3-52
CD349
CD351
CD352
Back to TOC
10. Remove the 5th driven gear from the driveshaft.
11. In order, remove the 2nd driven circlip, washer,
gear, and bushing from the driveshaft.
Back to Section TOC
CD354
CC210D
CD356
CD357
Next