Arctic Cat 400 Service Manual page 282

7. Install the 4th driven gear onto the driveshaft
making sure the four small dogs are facing
toward the 3rd driven gear as noted in disassem-
bling; then secure with the circlip.
8. Install the 1st driven washer (left side) onto the
shoulder of the splined shaft; then install the 1st
driven bushing and gear.
Back
3-238
CC216D
CC219D
CC508D
Back to TOC
9. Install the 1st driven washer (right side) on the
shaft making sure it lines up with the groove in
the shaft; then turn the washer locking it on the
shaft.
Back to Section TOC
CC220D
CC221D
CC222D
CC223D
Next