Quantum Encryption Key Manager (Q-Ekm); Table 1 Available Slots And Cod Upgrades Per Configuration - Quantum Scalar i500 User Manual

Table 1 Available Slots and
COD Upgrades Per
Configuration
5U
Minimum, 41, 41
Maximum
Available Slots
(including I/O
station slots)
Default 41
Pre-Activated
Slots
Available 41
Pre-Activated
Slots
Available NA
COD Slot
Upgrades
Quantum Encryption Key
Manager (Q-EKM)
Scalar i500 User's Guide
14U
41, 133
41
41, 87, 133
87, 133
Quantum Encryption Key Manager (Q-EKM) is a Java software program
1 that generates, protects, stores, and manages encryption keys. These keys
are used by the IBM LTO-4 tape drive to encrypt information being
written to, and decrypt information being read from, tape media. Q-EKM
is installed on a server or servers. The library is configured to
communicate with these server(s). The encryption keys pass through the
library-to-drive interface, so that encryption is "transparent" to the
applications.
If you purchase Q- EKM after you purchased your library, you must
install the license key on your library to enable the Q-EKM functionality.
When you purchase Q-EKM, Quantum's Service department will
schedule an appointment to install the application onto your server(s).
Once the application is installed, you must configure Q-EKM settings on
the library. These settings are not visible until after the license key is
installed. For instructions on configuring your library to use Q-EKM, see
Configuring Quantum Encryption Key Manager (Q-EKM)
23U 32U
41, 225 41, 317
41 41
41, 87, 41, 87, 133,
133, 179, 225 179, 225, 271,
317
87, 133, 87, 133, 179,
179, 225 225, 271, 317
Chapter 1 Description
Licensable Features
41U
41, 409
41
41, 87, 133,
179, 225, 271,
317, 363, 409
87, 133, 179,
225, 271, 317,
363, 409
on page 84.
31