Configuring/Starting Job Flow - Fuji Xerox ApeosPort-II C4300 User Manual

Configuring/Starting Job Flow

Job flow is a feature for executing a series of registered actions.
A job flow operates on documents stored in a mailbox, and starts in either of the
following ways: 1) manually or automatically start a job flow when a document is stored
in a mailbox, or 2) select a job flow to act on documents stored in a mailbox manually.
To start a job flow, you must make a link with a mailbox and the job flow sheet in
advance. Documents are automatically processed by the job flow sheet when they
stored in the mailbox.
Important • If the Authentication feature is not used, a job flow created in [Send from Mailbox] can only
• To use job flows, a HDD is necessary.
Features that can be registered are listed below.
Forward
Multiple forwarding recipients can be configured for each forwarding method.
Fax
Forwards via fax. Up to 100 recipients can be specified.
iFax Transmission
Forwards via iFax. Up to 100 recipients can be specified.
Print
Documents in a mailbox can be printed.
Some features are unavailable depending on the store type of the document.
Input
Fax Documents for
Private Polling
Scanning
Fax to Mailbox
iFax Received
Print Stored
*1 Load an A4 document in landscape orientation when TIFF-S has been selected for iFax forwarding profile. Loading
the document in portrait orientation will reduce the size of the iFax image.
*2 Even if you have set to delete documents after printing, a printed document in a mailbox will not be deleted if the
USB cable is disconnected while the document is being printed.
be used/edited/duplicated/deleted through the mailbox where the job flow is created. This
type of job flow is not displayed on the [Job Flow Sheets] screen. When using the
Authentication feature, job flows whose owners are authenticated are displayed on the [Job
Flow Sheets] screen.
Output
Print Fax
O O
O O
*2
O O
O O
X X

Configuring/Starting Job Flow

iFax
Transmis- Mail
*1
sion
O X
O X
O X
X
X X
: Available depending on System Administration mode settings
6
FTP SMB
X X
X X
X X
X X
X X
O: Available
X: Not available
211