Table of Contents
Advertisement
3
Set [Proxy server] to either of the following:
Clear the [Use a proxy server for your LAN] check box.
Click [Advanced], enter the IP address of the device in [Exceptions], and then click [OK].
4
Click [OK].
5
Click [OK] on the [Internet Options] screen.
Enabling JavaScript
1
Click [Tools] > [Internet Options].
2
Click the [Security] tab, and then click [Local intranet] > [Custom level].
3
Scroll down to [Scripting], and check that [Active scripting] is enabled.
4
Click [OK].
5
Click [OK] on the [Internet Options] screen.
Starting CentreWare Internet Services
1
Start a web browser.
2
Enter the device's IP address or the Internet address in the address box on the web browser,
and press the <Enter> key.
Examples of the IP address entry
https://192.0.2.1/ (IPv4)
https://[2001:DB8::1234] (IPv6)
Example of the Internet address entry (when the device's Internet address is
myhost.example.com)
https://myhost.example.com/
Note
If your network uses DNS (Domain Name System) and the device's host name is registered on the domain
name server, you can access the device using the Internet address combining the host name and the domain
name. For example, if the host name is "myhost", and the domain name is "example.com" then the Internet
address is "myhost.example.com".
When specifying a port number, add ":" and the port number after IP address or the Internet address.
If using the Authentication feature on the device, enter a user ID and password in the [User Name] and
[Password] fields. If you are not sure about the user ID and password, consult your system administrator. The
features you can operate vary depending on the system administration authority given to a user.
Reference
If CentreWare Internet Services is not displayed, refer to "CentreWare Internet Services Problems" (P.230).
Login to Authentication Mode
When the Authentication feature is enabled, log in to the Authentication mode using the
following operation.
Using CentreWare Internet Services
57
Advertisement
Table of Contents
