Appendix 2 Options And Products Available On The Market - Mitsubishi Electric FR-F700PJ Instruction Manual

Appendix 2 Options and products available on the market

Name
Parameter unit
(Eight languages)
Enclosure surface operation
panel
Parameter unit
connection cable
DIN rail attachment
AC reactor
DC reactor
EMC Directive compliant EMC
filter
EMC filter installation
attachment
Radio noise filter
Line noise filter
Brake resistor
High-duty brake resistor
Brake unit
Resistor unit
Discharging resistor
Power regeneration common
converter
Stand-alone reactor dedicated
for FR-CV
High power factor converter
Surge voltage suppression
filter
344
Model
FR-PU07
Interactive parameter unit with LCD display
FR-PU04
This operation panel enables inverter operation and monitoring
FR-PA07
of frequency, etc. from the enclosure surface
Cable for connection of operation panel or parameter unit
FR-CB20
 indicates a cable length. (1m, 3m, 5m)
FR-UDA01 to 03 Attachment for installation on DIN rail
FR-HAL
For harmonic current reduction and inverter input power factor
improvement
FR-HEL
SF
An EMC filter that complies with the EMC Directive
(EN61800-3 C3).
FR-E5NF
FR-A5AT03
An attachment used to mount an EMC compliant EMC filter
FR-AAT02
(SF) to an inverter.
FR-E5T
FR-BIF(H) For radio noise reduction (connect to the input side)
FR-BSF01
For line noise reduction
FR-BLF
MRS type,
For increasing the regenerative braking capability (permissible
duty 3%/6%ED)
MYS type
For increasing the regenerative braking capability (permissible
FR-ABR
duty 10%/ 6%ED)
For increasing the braking capability of the inverter (for high-
FR-BU2
inertia load or negative load)
FR-BR
Brake unit, electrical-discharge resistor and resistor unit are
GZG, GRZG type
used in combination
FR-CV
Unit which can return motor-generated braking energy back to
the power supply in common converter system
FR-CVL
The high power factor converter switches the converter section
on/off to reshape an input current waveform into a sine wave,
FR-HC2
greatly suppressing harmonics. (Used in combination with the
standard accessory.)
FR-ASF-H
Filter for suppressing surge voltage on motor 
FR-BMF-H
Applications, Specifications, etc.
Applicable
Inverter
Applicable for all
models
Applicable for all
models
Applicable for all
models
For the 3.7K or
lower
Applicable for the
certain capacities
Applicable for the
certain capacities
Applicable for the
certain capacities
Applicable for the
certain capacities
Applicable for all
models
Applicable for all
models.
200V: applicable
for the certain
capacities
Applicable for the
certain capacities.
Applicable for the
certain capacities
Applicable for the
certain capacities
Applicable for the
certain capacities
400V: applicable
for the certain
capacities
400V: applicable
for the 5.5K or
higher