Appendix 2 Options And Products Available On The Market - Mitsubishi Electric FR-F720P-0.75K to 110K Instruction Manual

Options and products available on the market

Appendix 2 Options and products available on the market

By fitting the following options to the inverter, the inverter is provided with more functions.
Name
Parameter unit
(Eight languages)
Parameter unit with battery
pack
Parameter unit
connection cable
Operation panel
connection connector
Heatsink protrusion
attachment
Intercompatibility
attachment
AC reactor
DC reactor
Brake unit
Resistor unit
Power regeneration
common converter
Dedicated stand-alone
reactor for FR-CV
Power regeneration
common converter
High power factor
converter
Line noise filter
Surge voltage suppression
filter
Reactor
Sine wave
filter Capacitor
366
Model
FR-PU07
Interactive parameter unit with LCD display
FR-PU04
Parameter unit that enables parameter setting without
FR-PU07BB(-L)
connecting the power supply to the inverter.
Cable for connection of operation panel or parameter unit.
FR-CB20
indicates a cable length.(1m, 3m, 5m)
Connector to connect the operation panel (FR-DU07) and
FR-ADP
connection cable
Attachment for protruding the inverter heatsink at the back of
FR-A7CN
the enclosure.
Attachment for replacing with the FR-F700P series using the
FR-AAT
installation holes of the FR-F500.
Attachment for replacing with the FR-F700P series using the
FR-A5AT installation holes of the FR-A100[Excellent] and
FR-A200[Excellent]
For harmonic current reduction and inverter input power
FR-HAL
factor improvement (total power factor approx. 88%)
For harmonic current reduction and inverter input power
FR-HEL
factor improvement (total power factor approx. 93%)
FR-BU2
For increasing the braking capability of the inverter (for high
FR-BR inertia load or negative load)
Brake unit and resistor unit are used in combination
MT-BR5
FR-CV/FR- Unit which can return motor-generated braking energy back
CVL to the power supply in common converter system
Energy-efficient and high-performance brake unit which
MT-RC regenerates the braking energy generated by the motor to
the power supply.
The high power factor converter switches the converter
FR-HC
section on/off to reshape an input current waveform into a
sine wave, greatly suppressing harmonics. (Used in
MT-HC
combination with the standard accessory.)
FR-BSF01
For line noise reduction
FR-BLF
FR-ASF
Filter for suppressing surge voltage on motor
FR-BMF
MT-BSL
For reducing the motor noise while the motor is driven by an
MT-BSC inverter. Use a reactor and a capacitor in combination.
Applications, Specifications, etc.
Applicable
Inverter
Applicable for all
models
Applicable for all
models
Applicable for all
models
Applicable for the
following
capacities:
FR-F720P-2.2K
to 110K
FR-F740P-0.75K
to 160K
Applicable for the
certain capacities
Applicable for the
certain capacities
For the 55K or
lower
Applicable for the
certain capacities
For the 55K or
lower
For the 75K or
higher
For the 55K or
lower
For the 75K or
higher
For the 55K or
lower
For the 75K or
higher
Applicable for all
models
For the 55K or
lower in the 400V
class
Applicable for the
following
capacities:
FR-F740P-5.5K
to 37K
For the 75K or
higher