Mitsubishi Electric FR-F700PJ Instruction Manual page 279

Air-conditioning inverter
Hide thumbs Also See for FR-F700PJ:
Table of Contents

Advertisement

Useful functions
(2) Automatic parameter setting using the operation panel (parameter setting mode)
The communication setting parameters for the GOT connection with a PU connector are
Operation example
automatically set.
1.
Screen at power-ON
The monitor display appears.
2.
Press
to choose the PU operation mode.
3.
Press
parameter setting mode.
4.
Turn
until
appears.
5.
Press
parameter setting mode.
6.
Turn
until
7.
Press
value.
"
" appears.
8.
Turn
to change it to the set value " ".
9.
Press
to set.
Pr.999 setting
10
GOT initial setting (PU connector)
20
50Hz rated frequency
The inverter is not in the PU operation mode.
1.Press
2. Carry out operation from step 3 again.
274
Operation
to choose the
(AUTO)
to enter the automatic
(GOT) appears.
to read the present set
Turn
to read another parameter.
Press
to show the setting again.
Press
twice to show the next parameter.
Description
are displayed alternately ... Why?
.
is lit and the monitor (4-digit LED) displays "0." (When Pr. 79 = "0 (initial setting)")
Display
PU indicator is lit.
Flicker
Parameter setting complete!!
Operation in the parameter setting mode
(AUTO) 
(GOT) Write "1"
(AUTO) 
(F50) Write "1"
The parameter
number read
previously appears.

Advertisement

Table of Contents
loading

Table of Contents