Table of Contents
Advertisement
NOTE
When encasing multiple inverters, install them in parallel as a
cooling measure.
Install the inverter (Filterpack) vertically.
When installing the Filterpack to the inverter, use the included
installation screws for the inverter rear panel.
Using a longer screw may damage the Filterpack.
1.5.3
Installation of Filterpack
The following installations are recommended for Filterpack and the inverter.
For wiring of Filterpack and the inverter, refer to page 19.
Rear panel installation
NOTE
When instal
ling Filterpack of 11K or 15K on the rear
panel of the inverter, do not install on moving objects
or places which vibrates (exceeding 1.96m/s
Inverter placement (Installation of Filterpack)
Side panel installation
Filterpack
Filterpack
2
).
1cm or more
NOTE
To release heat of the inverter and Filterpack,
leave clearance of 1 cm or more between the
inverter and Filterpack.
1
13
Advertisement
Table of Contents
