Download  Print this page

Parameter Clear/ All Parameter Clear - Mitsubishi Electric FR-F700PJ Instruction Manual

Air-conditioning inverter.
Hide thumbs

Advertisement

Parameter clear/ All parameter clear

4.25 Parameter clear/ All parameter clear
POINT
 Set "1" in Pr.CL Parameter clear, ALLC all parameter clear to initialize all parameters. (Parameters are not cleared
when "1" is set in Pr. 77 Parameter write selection.)
 Refer to the extended parameter list on page 64 for parameters cleared with this operation.
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Press
to choose the PU operation mode.
3.
Press
to choose the parameter setting
mode.
4.
Turn
until
5.
Press
to read the present set value.
"
"(initial value) appears.
6.
Turn
to change it to the set value "
7.
Press
to set.
 Turn
 Press
 Press
Setting
0
Not executed.
Set parameters back to the initial values. (Parameter clear sets back all parameters except
1
calibration parameters, terminal function selection parameters to the initial values.) Refer to the
parameter list on page 64 for availability of parameter clear and all parameter clear.
REMARKS
The inverter is not in the PU operation mode.
PU connector is used.
1. Press
. [PU] is lit and the monitor (4-digit LED) displays "1". (When Pr. 79 = "0" (initial value))
2. Carry out operation from step 6 again.
 Stop the inverter. Parameter clear is unavailable when the inverter is running, and will cause the write disable error.
290
(
) appears.
".
Flicker ··· Parameter setting complete!!
to read another parameter.
to show the setting again.
twice to show the next parameter.
Description
are displayed alternately ... Why?
Display
PU indicator is lit.
PRM indicator is lit.
(The parameter number read previously appears.)
Parameter clear
All parameter clear
Parameter clear
All parameter clear

Advertisement

Table of Contents

   Also See for Mitsubishi Electric FR-F700PJ

Comments to this Manuals

Symbols: 0
Latest comments: