Inverter Placement (Installation Of Filterpack) - Mitsubishi Electric FR-F700PJ Instruction Manual

Air-conditioning inverter
Hide thumbs Also See for FR-F700PJ:
Table of Contents

Advertisement

SERIAL number check
Rating plate example
Symbol Year
Month
SERIAL (Serial No.)
(2)
Filterpack
Filterpack model
FR-BFP2- H
Symbol Applicable power voltage
None
200V class
400V class
H
Parts name and plate
Rating plate
Filterpack model
Rating
SERIAL number
Crimping terminals for the inverter connection
Black cable: connect to terminal R, S and T of the inverter
Red cable: connect to terminal P and P1 of the inverter
Green and yellow striped cable: connect to the earth (ground) terminal
Enclosed items
Name
Screw for leakage current
countermeasure and spacer
Rear panel installation
L-bracket
Screw for inverter rear panel
installation
* The screw size differs according to capacities. ((H)7.5K or lower: M4×14, (H)11K and (H)15K: M5×20)
The SERIAL consists of one symbol, two characters indicating production year and month, and six

characters indicating control number.
The last digit of the production year is indicated as the Year, and the Month is indicated by 1 to 9,
Control number
X (October), Y (November), or Z (December.)
FR-BFP2-H0.4K
MODEL
BKO-
RATED
SERIAL
MITSUBISHI ELECTRIC CORPORATION
When the earth leakage breaker or earth leakage relay operates
unnecessarily due to leakage current, use this screw as a
countermeasure.
Enclosed for the 5.5K or higher
Use these screws for installation of Filterpack onto the inverter rear
panel.
Product checking and parts identification
K
0.4 to 15 Represents the applicable inverter capacity (kW)
Installation hole
Inverter rear panel
installation screw hole
Terminal block cover
Terminal block for commercial power supply connection
Earth (Ground) terminal
Description
Quantity Refer to page
1 for each
42
1
12
4
12
*
3
1

Advertisement

Table of Contents
loading

Table of Contents