Mitsubishi Electric FR-F700PJ Instruction Manual page 293

Air-conditioning inverter
Hide thumbs Also See for FR-F700PJ:
Table of Contents

Advertisement

FR-E500 series operation panel (PA02) setting
[Setting with the inverter operation panel without fitting the FR-E500 series operation panel (PA02)]
(a) Method to adjust any point
(to change to 80% from 100%)
Operation
1.
Confirm the operation status indicator and
operation mode indicator
 The inverter should be at a stop.
 The inverter should be in the PU operation mode
(depends on
2.
Press
to choose the parameter setting
mode.
3.
Turn
until
4.
Press
to display
5.
Turn
until
C25 (Pr. 923) Frequency setting voltage gain (built-in
potentiometer)
6.
Press
to show the analog-to digital
conversion value (%).
7.
Turn
to set gain voltage (%).
"minimum value of the potentiometer is 0%,
maximum value is 100%"
REMARKS
The current setting at the instant of turning
8.
Press
to set.
Turn
Press
Press
REMARKS
By pressing
It cannot be confirmed after execution of step 7.
288
).
appears.
.
appears. Turn the dial to
to read another parameter.
to return to the
twice to show the next parameter (
after step 6, you can confirm the present frequency setting bias/gain setting.
is displayed.
Flicker...Parameter setting complete!!
(Adjustment completed)
indication (step 4).
).
Display
The parameter
number read
previously appears.
C0 to C25 settings
are enabled.
Analog voltage value (%) of built-
Hz
Hz
A
A
in frequency setting potentiometer
The gain frequency is reached
when analog voltage value
(%) of built-in frequency
setting potentiometer is 80%.
Hz
A
Hz
A

Advertisement

Table of Contents
loading

Table of Contents