Download  Print this page

Mitsubishi Electric FR-F700PJ Instruction Manual Page 291

Air-conditioning inverter.
Hide thumbs

Advertisement

FR-E500 series operation panel (PA02) setting
4.
Set the gain frequency in Pr.923 to display the analog voltage value of the built-in frequency setting
potentiometer in %. (80Hz maximum)
5.
Method to adjust any point by turning the built-in frequency setting potentiometer.
(application of 5V)
Analog voltage
value (%) of the
built-in frequency
setting potentiometer
6.
Pressing
7.
Set the Pr. 79 Operation mode selection value according to the operation mode being used.
286
Operation
Current setting of gain
frequency
Hz
RUN
A
MON
PU
EXT
A near-0 value is shown at the
MIN position of the
potentiometer, and near-100 at
MAX.
Set to the potentiometer
position where operation is to
be performed at the set
frequency
(80Hz in the example).
Turn the potentiometer
to the gain frequency
output (MAX) position.
Hz RUN
A MON
MON
PU
shifts to the next parameter.
Changing the gain
frequency
Hz
RUN
A
MON
PU
EXT
Press
to change the set frequency.
Press for 1.5s
Analog voltage value (%) of the built-in
frequency setting potentiometer
Hz RUN
A
MON
PU
EXT
The gain voltage
corresponding to the
potentiometer position appears.
Press for 1.5s
SET
Flicker
When the potentiometer
is at the MAX position,
the value is nearly 100.

Advertisement

Table of Contents

   Also See for Mitsubishi Electric FR-F700PJ

Comments to this Manuals

Symbols: 0
Latest comments: