Locating Back Panel Features
The illustration below shows the system features that are accessible from the back
panel.
System status LEDs
Power supply
status LEDs
Power supply 1
AC inlet
Power supply 0
AC inlet
Serial port (ttyb)
Back Panel LEDs
The back panel LEDs include the system status LEDs, the Ethernet port LEDs, the
power supply LEDs, and the ALOM card LED. The system status LEDs and the
power supply LEDs are replicated from the front panel.
System Status LEDs
The back panel system status LEDs consist of the System Activity LED, the system
Service Required LED, and the Locator LED. These LEDs are located in the top-left
corner of the back panel, and operate as described in
SCSI port
USB ports
Ethernet ports
(usb0-3)
(net0, net1)
Chapter 1 Identifying Front Panel and Back Panel Features
Slot 5
Slot 4
Slot 3
Slot 2
Slot 1
Slot 0
ALOM serial management port
ALOM network management port
.
TABLE 1-1
9