When The Machine Is Not Used For A Long Time (Custody Wash) - MIMAKI JV400-LX Series Operation Manual

When the Machine Is Not Used for a Long Time (CUSTODY WASH)

When the machine is not going to be used for a week or more, use the cleaning function for custody to clean
the head nozzles and ink discharge passage.After this, keep the machine in custody.
Check the items on
the right beforehand.
• When the following messages are indicated, check the waste ink
tank, and then operate it, referring to P.4-23 "If a Waste Ink Tank
Confirmation Message Appears" according to the situation.
1
Press the
2
Press
3
Press the
• The carriage moves onto the platen.
4
Clean the wiper and the bracket.
(1) Open the front cover then pull out it by holding projections at both ends of the wiper.
(2) Clean the wiper and bracket with a clean stick dipped in cleaning solution for maintenance.
(ML001-Z-K1) Wipe off so that cleaning solution for maintenance will not remain.
(3) Insert it in the original position by holding the projections at both ends of the wiper.
5
Press the
4-10
Is [NEAR END] or [INK END] displayed?
• The cleaning solution or ink is absorbed when the nozzles are washed.
At this time, if the state of "no ink" or "almost no ink" is detected, the nozzle washing operation
cannot start.
• Replace the cartridge with another from which the state of "almost no ink" or "no ink" is not detected.
key in LOCAL.
MAINT.
to select [CUSTODY WASH].
key.
• Until wiper/ bracket cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the
screen. After the work up to the step 4 is completed, press the
key before cleaning is completed, the machine moves to the next washing procedure.
key.
• Until washing liquid is filled, [COMPLETED (NEXT): ENT] is displayed on the screen. After the
work up to the Step 6 is completed and you close the front cover, press the
press the key before washing liquid is filled, the carriage returns to the original position.
C h e c k w a s t e i n k [ EN T ]
S T A T I ON
CARR I AGE OU T [ EN T ]
S T A T I ON
CUS TODY WA SH [ EN T ]
WI PER C L EAN I NG
COMP L E T ED ( NEX T ) [ EN T ]
key. If you press the
Projection
F i l l t h e l i q u i d
COMP L E T ED ( NEX T ) [ EN T ]
key. If you