Air Valve - Honda 1986 GoldWing GL1200A Manual

CFI System
Air V a l v e - - - - - - - - - - - - - - - - - - - - - - - - -
Inspection
Remove the air valve cover, and disconnect the coupler.
Measure the resistance between the terminals.
Resistance: 65-100 ohms
Removal/Installation
Remove the two mountIng bolts and the air valve cover.
Disconnect the heater coupler from the air valve.
Disconnect the coolant and air hoses.
Remove the two
air
valve bolts and remove the valve.
Install In the reverse order of removal.
Air C h a m b e r - - - - - - - - - - - - - - - - - - - - - - -
Removal
NOTES:
• Keep the intake pipes. injectors, and caps in their
original sets, and install them in their original locations.
• Adjust the injectors with shims whenever you install
these new parts: injector. cap, delivery pipe, throttle
body. and intake pipe.
Turn the ignition OFF and disconnect the fuel pump
coupler
Remove the fuel filter from the left engIne mount bracket.
Remove the fainng lower and inner covers (see page
9-21
Remove the air cleaner element. Remove the four
screws and the air cleaner case. Remove the element
holder.
10-34
FUEL LINES
BANJO BOLT