Set The Paper Size - Sharp MX-2301N Operation Manual

Bypass Tray Type/Size Setting
Select the paper type.
Plain
5
Pre-Punched
Heavy Paper 1
Bypass Tray Type/Size Setting
Type
Plain
6
• When [Envelope] is selected, specify the size of the envelope. When finished, touch the [OK] key.
• If tab paper is selected, check the size. Touch the [Auto-Inch] key or the [Auto-AB] key. When you have finished
checking/changing the setting, touch the [OK] key.
Paper Select
A4
A4R
7
B4
A3
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you placed the originals on the document glass, scan each page one page at a time.
When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
8
press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
first original.
To cancel scanning of the original and copying...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
Pre-Printed Recycled Letter Head
Colour Thin Paper Labels
Heavy Paper 2 Transparency Tab Paper
(1)
Type
Size
12x18(A3W),11x17,
Auto-Inch
1 / 2
8 x14,8 x11,8 x11R, 1 / 2 1 / 2
5 x8 R,7 x10 R,A3,A4,B4,B5 1 / 2 1 / 2
1 / 2 1 / 4
A3W(12x18),A3,A4,A4R,A5R
Auto-AB
B4,B5,B5R,216x330(8 x13)
1 / 2
11x17,8 x11 1 / 2
Custom Size
X420 Y297
A4
Plain
Tab Paper
Plain
Plain
Plain
(1)
).
Select the type of paper used in the
Cancel
bypass tray.
1/2
Select the paper type that you will use.
1/2

Set the paper size.

(2)
OK
(1) Select the paper size.
Manual
[Auto-Inch] key
When the paper placed in the bypass tray is an inch size
(8-1/2" x 11", etc.), the paper size will be detected
automatically and an appropriate size set.
2/2
[Auto-AB] key
When the paper inserted in the bypass tray is an AB size
(A4, etc.), the paper size will be detected automatically
and an appropriate size set.
[Custom Size] key
Touch this key if you wish to enter numeric values for the
size of the loaded paper.
☞
Enter the paper size of the bypass tray
[Manual] key
This key can be touched to display the [16K], [16KR], and
[8K] keys. Touch one of these keys if you loaded the
corresponding size of paper.
(2) Touch the [OK] key.
Select the bypass tray.
OK
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
(2)
2-39
COPIER
(page 2-40)
Contents