Sharp Osa Settings; External Account Setting - Sharp MX-2301N Operation Manual

Sharp OSA Settings

Default Display Setting
(When the application communication module is
installed.)
The base screen that appears when the [DOCUMENT
FILING] key is pressed can be changed to the Sharp
OSA external application selection screen.
Select the [Sharp OSA] key so that it is highlighted and
touch the [OK] key.

External Account Setting

(When the external account module is installed.)
External Account Control
When this setting is enabled, the machine enters
external totaling mode and the totaling function can be
used via an external account application.
Enable Authentication by External Server
When this setting is enabled, the machine enters
external authentication mode. Access to the machine is
controlled by an external application.
When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine see "TURNING THE POWER ON AND
(page 1-12) in "1. BEFORE USING THE MACHINE ".
USB Driver Settings
(When the external account module or application
communication module is installed.)
External Keyboard
Select whether the internal or external driver for the
external keyboard is used.
USB Memory
Select whether the internal or external USB memory
driver is used.
Level of Encryption
Select the level of encryption for communication using
the external driver.
Select from none or AES-128 or AES-256.
Downloaded From ManualsPrinter.com Manuals
• When the external driver is selected, the connected
USB device is treated as not connected and cannot
be used.
• When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine see
OFF" (page 1-12) in "1. BEFORE USING THE
MACHINE ".
OFF"
7-135
SYSTEM SETTINGS
"TURNING THE POWER ON AND
Contents