Sharp MX-2301N Operation Manual page 515

Select the special modes.
(1) Touch the [Job Detail Settings] key.
2
(2) Touch the [Special Modes] key.
(3) Touch the [Program] key.
☞
SPECIAL MODES
Program
Program 1
Program 3
3
Program 5
Program 7
Program:Program 4
xxx@xx.xxx.com
Scan Scan
Mode Switch
Job Detail
Settings
Send Settings
4
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
5
When scanning finishes, place the next original and press the [COLOUR START] key or the [BLACK & WHITE START]
key. Repeat until all pages have been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(page 5-64)
Program 2
Program 4
Program 6
Program 8
(1)
Send
Auto
A4
) to cancel the operation.
Retrieve the stored program.
OK
1/6
(1) Touch the desired program key.
(2) Touch the [OK] key.
(2)
Select additional settings.
When a program is used, the following settings can be
additionally specified:
• Job detail settings:
Special Modes
File
• Send settings
Quick File
• Special modes:
* When stored in the program, this cannot be additionally
specified.
5-67
SCANNER/INTERNET FAX
Original scan size*, send size, file
format, colour mode
Timer Transmission, Card Shot, File,
Quick File, Transaction Report
Contents