Disabling Of Bypass Printing; Customize Key Setting; Key Operation Setting; Disabling Of Clock Adjustment - Sharp MX-2301N Operation Manual

Disabling of Bypass Printing

This setting is used to disable bypass printing (printing
other jobs ahead of a job that has been stopped*
because the paper required for the job is not in any of
the trays).
To enable this setting, select the checkbox
touch the [OK] key.
* This does not include cases where the paper ran out
during the job.

Key Operation Setting

This setting determines how long a key in the touch
panel must be touched until the key input is registered.
The time can be set from 0 to 2 seconds in increments of
0.5 seconds.
By lengthening the time setting, key input can be
prevented when a key is touched accidentally. Keep in
mind, however, that when a longer setting is selected
more care is required when touching keys to ensure that
key input is registered.
Specify the time with the
[OK] key. (To make the number change quickly, keep
your finger on the
To disable auto repeat of key input, select the [Disable
Auto Key Repeat] checkbox
The touch panel contains keys such as the zoom keys
(for setting the ratio) that can be touched continuously
to make a value change until it reaches a desired
value. This feature whereby a value changes
continuously while your finger is on the key is called
key repeat.

Disabling of Clock Adjustment

This setting is used to prohibit changing of the date and
time.
To enable this setting, select the checkbox
touch the [OK] key.
Downloaded From ManualsPrinter.com Manuals
and
keys and touch the
or key.)
and touch the [OK] key.
and
Disabling of Covers/Inserts Mode
This setting is used to prohibit the use of the covers and
inserts function.
To enable this setting, select the checkbox
touch the [OK] key.

Customize Key Setting

Short-cuts to functions that are frequently used can be
displayed in the base screen of each mode.
For information on customize keys, see the chapters for
each function.
The settings are shown below.
Item
Customized
Keys 1 - 3
Item
Return to the
Defaults
This setting can only be configured in the Web pages.
It cannot be configured in the touch panel of the
machine.
7-92
SYSTEM SETTINGS
Description
Enter a name for the customized key
(maximum of 14 characters).
Select the function that you want to
assign to the key. The functions that
can be selected vary by mode.
This returns all customized keys to
their factory default state.
Contents
and