Sharp MX-2301N Operation Manual page 373

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 25 mm to 432 mm (1" to 17"), and the height can be from 25 mm to 297 mm (1" to 11-5/8").
Display the original settings screen.
(1) Touch the [Job Detail Settings] key.
1
(2) Touch the [Original] key.
The automatically detected original size appears at the top of the [Original] key.
☞
JOB DETAIL SETTINGS
Fax
Scan Size
Original
2-Sided
2
Booklet
2-Sided
Tablet
Fax
Original
Auto
Manual
Manual
3
You can also touch the
Fax
Scan Size
Original
2-Sided
4
Booklet
2-Sided
Tablet
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer that 432 mm (17") can be scanned (maximum width
1000 mm (39-3/8")). In this case, touch the [Standard Size] tab and then the [Long Size] key in the screen of step 3.
☞
Specifying the original scan size (Specify using a standard size)
☞
TRANSMITTABLE ORIGINAL SIZES
Downloaded From ManualsPrinter.com Manuals
(page 4-44)
100% Send Size
Auto A4
Auto
Image Orientation
X
(25 432)
X 420
mm
Y
(25 297)
Y 297
mm
Standard Size Size Input
(2), (3) (1)
keys to change the number.
Send Size
X420 Y297 Auto
Image Orientation
Touch the "Scan Size" key.
OK
Enter the scan size.
OK
(1) Touch the [Size Input] tab.
(2) Touch the X (width) numeric value display
key and enter the width.
(3) Touch the Y (height) numeric value display
(4)
key and enter the height.
(4) Touch the [OK] key.
Touch the [OK] key.
OK
The specified size appears in the "Scan Size" key.
(page 4-47)
(page 4-28)
4-48
FACSIMILE
Contents