Copying A3 (11" X 17") Originals With No Edge Cut-Off (A3 (11" X 17") Full Bleed) - Sharp MX-2301N Operation Manual

COPYING A3 (11" x 17") ORIGINALS WITH NO EDGE
CUT-OFF (A3 (11" x 17") Full Bleed)
This feature lets you copy an entire A3 (11" x 17") size original at full size with no image cut-off at the edges.
A3W (12" x 18") size paper is used, which is slightly larger than A3 (11" x 17") size.
A3 (11" x 17") size original
1
Select the special modes.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
2
(3) Touch the
(4) Touch the [Image Edit] key.
☞
[Image Edit] KEY
Image Edit
Photo Repeat
3
Full Bleed
(1)
4
Downloaded From ManualsPrinter.com Manuals
keys to switch through the screens.
(page 2-100)
Multi-Page Mirror
Enlargement Image
A3
Centring
A3 (12" x 18") full bleed copy
Place the original face down on the
document glass.
Select A3 (11x17) Full Bleed.
OK
(1) Touch the [A3 Full Bleed] or [11x17 Full
Bleed] key so that it is highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
(2)
[OK] key to return to the base screen of copy mode.
Place A3W (12" x 18") paper in the
bypass tray.
Pull out the extension tray, adjust the guides to the width of
A3W (12" x 18") paper, and place the paper in the bypass tray.
After loading the paper, configure the bypass tray settings as
explained in "MAKING COPIES USING THE BYPASS
(page 2-38).
2-107
COPIER
TRAY"
Contents