Sharp MX-2301N Operation Manual page 119

Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
4
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 999 copies (sets) can be set.
• If you are only making a single copy, the copy can be made with the copy number display showing "0".
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
6
To cancel scanning of the original and copying...
Press the [STOP] key (
Using the [Binding Change] key
Originals
A
1
Downloaded From ManualsPrinter.com Manuals
2-Sided Copy
Original A4
Output
Plain
A4
Special Modes
A4
1.
A4R File
2.
B4
3.
A3 Quick File
4.
(A)
7
2-Sided Copy
) and then enter the correct number.
).
Binding Change is used
A
A
2
3
Check the paper to be used and the
0
colour mode.
Make sure that the desired paper (tray) and colour mode are
selected.
• To change the paper (tray), touch the [Job Detail Settings]
key and then the [Paper Select] key, or touch the paper size
display (A).
☞
PAPER TRAYS
• To change the colour mode, touch the [Colour Mode] key.
☞
COPY COLOUR MODES
Set the number of copies (number of
sets) with the numeric keys.
The reverse side
is upside down.
Select this when
the pages will be
bound into a
tablet.
2-17
COPIER
(page 2-11)
(page 2-21)
Binding Change is not used
The reverse side
A is not upside
down.
Select this when
the pages will be
A
bound into a
booklet.
Contents