Using The Document Glass To Send A Fax In Direct Transmission Mode - Sharp MX-2301N Operation Manual

USING THE DOCUMENT GLASS TO SEND A FAX IN
DIRECT TRANSMISSION MODE
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
To
AAA AAA
CCC CCC
EEE EEE
Freq. ABCD
2
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot
be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Ready to send.
Scan
Fax
Mode Switch
Job Detail
3
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Downloaded From ManualsPrinter.com Manuals
Original size
detector
(2)
Cc
1/1
Address Review
BBB BBB
DDD DDD
FFF FFF
EFGHI JKLMN OPQRST UVWXYZ etc.
"ENTERING DESTINATIONS" (page 4-16).
Speaker
Send
Auto
A4
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
A4 (8-1/2" x 11")
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Enter the destination fax number.
(3)
(1) Touch the [Address Book] key in the base
Condition
Settings
screen.
(2) Touch the one-touch key of the desired
Global
Sub Address
destination.
Sort Address
(3) Touch the [Condition Settings] key.
Touch the [Direct TX] key.
Resend
Address Book
Sub Address
Special Modes
File
Quick File
4-35
Document glass scale
A4R (8-1/2" x 11"R)
B5
FACSIMILE
mark
B5R
B4 (8-1/2" x 14")
A3 (11" x 17")
Contents