Using The Automatic Document Feeder To Send A Fax In Direct Transmission Mode - Sharp MX-2301N Operation Manual

USING THE AUTOMATIC DOCUMENT FEEDER TO
SEND A FAX IN DIRECT TRANSMISSION MODE
Indicator
line
1
To
AAA AAA
CCC CCC
EEE EEE
2
Freq. ABCD
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Ready to send.
Scan
Fax
Mode Switch
Job Detail
3
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
Press the [BLACK & WHITE START] key.
Transmission begins.
4
To cancel transmission...
While "Dialling. Press [
• The following functions cannot be used with direct transmission:
Program, Timer Transmission, 2in1, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box,
2-Sided Original Scanning, Global Address Search
• Resending will not take place when a direct transmission is not successful due to a communication error or other reason.
• If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission will
wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission will
begin. While the direct transmission is waiting, the [JOB STATUS] key can be pressed to display the job status screen. No
other operations are possible.
☞
CHECKING THE STATUS OF FAX JOBS
Downloaded From ManualsPrinter.com Manuals
(2)
Cc
1/1
BBB BBB Address Review
DDD DDD
FFF FFF
OPQRST
EFGHI JKLMN UVWXYZ etc.
"ENTERING DESTINATIONS" (page 4-16).
Speaker
Send
Auto
A4
] to cancel." appears or while the fax is being transmitted, press the [STOP] key (
Place the originals face up in the document
feeder tray with the edges aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Enter the destination fax number.
(3)
(1) Touch the [Address Book] key in the base
Condition
Settings
screen.
Global (2) Touch the one-touch key of the desired
Sub Address
destination.
Sort Address
(3) Touch the [Condition Settings] key.
Touch the [Direct TX] key.
Resend
Address Book
Sub Address
Special Modes
File
Quick File
(page 4-113)
4-32
FACSIMILE
).
Contents