Transmitting Metadata - Sharp MX-2301N Operation Manual

TRANSMITTING METADATA

Follow the steps below to select a metadata set, enter each item, and perform metadata transmission.
Mode Switch
Job Detail
Settings
Send Settings
Metadata Entry
1
(2)
• If no metadata sets have been stored, the [Data Entry] key cannot be selected. Store a metadata set in the Web
pages and then perform the transmission procedure.
• If a specific metadata set has been specified as the default set, go to step 3.
Metadata Set
Set Name:Metadata 1
Metadata 1
Metadata 3
2
Metadata 5
Metadata 7
(1)
Data Entry
Set Name:Metadata 1
appUserId
fromName
replyTo
3
If you accidentally selected the wrong metadata set or wish to use a different metadata set when a default metadata
set has been set, touch the [Metadata Set] key. Touch the [OK] key in the message screen that appears. You will
return to the screen of step 1. Metadata items entered to that point will be cancelled.
Downloaded From ManualsPrinter.com Manuals
Scan Fax
Internet Fax
USB Mem. Scan
PC Scan Data Entry
(1)
Cancel
Metadata 2
Metadata 4
Metadata 6
Metadata 8
Metadata Set Cancel
Switch to data entry mode and display
Address Book
the metadata set screen.
Address Entry
Special Modes
(1) Touch the [Mode Switch] key and select
File
data entry mode.
Quick File
(2) Touch the [Metadata Entry] key.
Select a metadata set.
OK
1/2
(1) Touch the key of the metadata set that you
wish to use.
(2) Touch the [OK] key.
(2)
The keys of the items stored in the
OK
metadata set will appear. Touch the key
1/9
of the item that you want to enter.
5-117
SCANNER/INTERNET FAX
Contents