Sharp MX-2301N Operation Manual page 434

To
AAA AAA
CCC CCC
EEE EEE
Freq.
ABCD
2
If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Press the [BLACK & WHITE START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
3
When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have
been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
When the relay machine receives the fax, it will automatically transmit the fax to each of the end receiving machines
programmed in the memory box.
To cancel scanning...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(2)
Cc
1/1
BBB BBB Address Review
DDD DDD
Sub Address
FFF FFF
EFGHI JKLMN OPQRST UVWXYZ etc.
(3), (5)
) while the original is being scanned.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
Condition
Settings
screen.
(2) Touch the one-touch key of the desired
Global
destination.
Sort Address
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(3) Touch the [Sub Address] key.
"/" appears.
(4) Enter the sub-address with the numeric
keys.
(5) Touch the [Sub Address] key.
"/" appears.
(6) Enter the passcode with the numeric keys.
4-109
FACSIMILE
Contents