Sharp MX-2301N Operation Manual page 183

Special Modes
Card Shot
X
Y
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOUR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
6
To cancel scanning...
Press the [STOP] key (
7
To cancel copying...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(1)
Cancel
Size Reset
(25 210)
86
X
mm
(25 210)
54
Y
mm
(A)
).
).
Place next original. Press [Start].
When finished, press [Read-End].
Read-End
).
Select card shot settings.
(2)
(1) Enter the original size.
OK
With the [X] key highlighted, enter the X (horizontal)
OK
dimension of the original with the
Touch the [Y] key and enter the Y (vertical) dimension of
Fit to
the original with the
Page
You can also directly touch a numeric value display key to
(B)
change a number with the numeric keys.
(A) The [Size Reset] key can be pressed to return the
horizontal and vertical dimensions to the values set in
"Card Shot Settings" in the system settings
(administrator).
(B) To enlarge or reduce the images to fit the paper
based on the entered original size, touch the [Fit to
Page] key.
(2) Touch the [OK] key.
You will return to the base screen of copy mode. Make
sure that the entered dimensions appear in the [Original]
key.
Touch the [Read-End] key.
Copying will begin.
2-81
COPIER
keys.
keys.
Contents