Performing "Scan To Hdd - Sharp MX-2301N Operation Manual

PERFORMING "Scan to HDD"

1
2
File Store
Scan to HDD
3
Mono2/Auto
Colour Mode
Job Detail
Settings
Auto A4
Original
4
(1)
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
Press the [COLOUR START] key or the [BLACK & WHITE START] key .
Scanning begins.
For the procedure for placing the original, see step 4 of
5
A beep will sound to indicate that Scan to HDD is completed.
To cancel scanning...
Press the [STOP] key (
When Scan to HDD is performed without appending file information, the following user name and file name are automatically assigned to the file.
User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second
Stored to:
When user authentication is used, the user name that was used for login is automatically selected.
Downloaded From ManualsPrinter.com Manuals
DOCUMENT
FILING
HDD Status
File Retrieve
External Data
(1)
).
(Example: HDD_04042010_112030)
Main Folder
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Press the [DOCUMENT FILING] key.
Touch the [Scan to HDD] key.
Search
File
Folder
Quick File
Folder
Access
Select Scan to HDD settings.
Back
If you do not wish to select settings, go to the next step.
(1) Select the original size, exposure,
resolution, compression ratio, colour mode,
Special Modes
and special modes.
File
Information
See ""Scan to HDD"
(2) Touch the [File Information] key.
(2)
The settings are the same as for "File". See
INFORMATION" (page 6-14).
"SAVING A FILE WITH "Quick
6-21
DOCUMENT FILING
SCREEN" (page 6-17).
"FILE
File"" (page 6-10).
Contents