Changing The Colour Mode - Sharp MX-2301N Operation Manual

CHANGING THE COLOUR MODE

This procedure is used to change the colour mode used to scan the original when the [COLOUR START] key or the
[BLACK & WHITE START] key is pressed.
This function cannot be used in Internet fax mode.
Start key
[COLOUR START]
key
[BLACK & WHITE
START] key
Select the mode and display the colour mode settings screen.
(1) Touch the [Mode Switch] key and select the desired mode.
1
(2) Touch the [Job Detail Settings] key.
(3) Touch the [Colour Mode] key.
☞
JOB DETAIL SETTINGS
Scan
Colour Mode
Colour Mode
B/W Mode
(1)
2
• System Settings (Administrator): Default Colour Mode Settings
The default colour mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the colour mode.
Downloaded From ManualsPrinter.com Manuals
Mode
Auto
Full Colour
Mono2
Greyscale
(page 5-50)
Colour B/W
Auto Mono2
Full Colour Greyscale
Mono2
Greyscale
(2)
Scanning method
The machine detects whether the original is colour or black and white and
automatically selects full colour or black and white (Mono2 or Greyscale)
scanning.
The original is scanned in full colour. This mode is best for full colour
originals such as catalogues.
Colours in the original are scanned as black or white. This mode is best for
text-only originals.
The colours in the original are scanned in black and white as shades of
grey (greyscale).
Select the colour mode.
OK
(1) Touch the key of the mode to be used when
the [COLOUR START] key is pressed.
You can select whether black & white scanning will take
place in Mono2 or greyscale when [Auto] is selected and
a black and white original is scanned. Note that if the file
(3)
format is set to JPEG, scanning will take place in
greyscale.
(2) Touch the key of the mode to be used when
the [BLACK & WHITE START] key is
pressed.
(3) Touch the [OK] key.
5-63
SCANNER/INTERNET FAX
Contents