Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Loading Trays - Sharp MX-C407P User Manual

Loading paper and specialty media

Loading paper and specialty media

Setting the paper size and type

1
From the control panel, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source
For non-touch-screen printer models, press
2
Set the paper size and type.
Configuring Universal paper settings
1
From the control panel, navigate to:
Settings > Paper > Media Configuration > Universal Setup
For non-touch-screen printer models, press
2
Configure the settings.

Loading trays

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1
Remove the tray.
Note: To avoid paper jams, do not remove trays while the printer is busy.
2
Adjust the guides to match the size of the paper that you are loading.
Note: Use the indicators on the bottom of the tray to position the guides.
to navigate through the settings.
to navigate through the settings.
17