System Settings (Administrator); Accessing The System Settings (Administrator); When User Authentication Is Not Enabled - Sharp MX-2301N Operation Manual

SYSTEM SETTINGS
(ADMINISTRATOR)
This chapter explains the system settings that are configured by the administrator of the machine.
Accessing the System Settings
(Administrator)
To access the system settings (administrator), the administrator must follow the procedure below to log in.

When User Authentication is not Enabled

When "User Authentication
System Settings
Total Count
1
Paper Tray
Settings
Printer Condition
Settings
System Settings
Administrator Password
Enter the administrator password.(From 5 to 32 characters)
Password
2
This completes the administrator login procedure. The system settings (administrator) can be used.
• User authentication is initially disabled (factory default setting).
• To logout...
Touch the [Logout] key in the top right corner of the screen. You can also touch the [Exit] key to quit the system settings.
(If Auto Clear activates, logout will automatically take place.)
Downloaded From ManualsPrinter.com Manuals
Setting" (page 7-80) is not enabled, follow the procedure below to log in.
Admin Password Exit
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Cancel
(1) (2)
Touch the [Admin Password] key.
Log in.
OK
(1) Touch the [Password] key and enter the
administrator password.
(2) Touch the [OK] key.
7-59
SYSTEM SETTINGS
Contents