Sharp MX-2301N Operation Manual page 139

Punch function
If an optional punch module is installed, holes can be punched in output.
Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2" to 11" x 17"). However, A3W (12" x 18") sized paper and
special media such as transparency film and tab paper cannot be used.
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling
or punching in the desired position on the paper.
Document feeder tray
One staple (bottom)
Downloaded From ManualsPrinter.com Manuals
[Examples]
[Original 1]
[Original 2]
Staple sort
Document glass
One staple (top)
c b a
Two staples
c b a
c b a
[Punch positions]
[Punch positions]
Document feeder tray
2-37
COPIER
Punch
Document glass
c b a
c b a
Contents