Adjusting The Sharpness Of An Image (Sharpness) - Sharp MX-2301N Operation Manual

ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)

This is used to sharpen an image or make it softer.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
2
(3) Touch the
(4) Touch the [Colour Adjustments] key.
(5) Touch the [Sharpness] key.
☞
[Colour Adjustments] KEY
Colour
Adjustments
3
Sharpness
Press the [COLOUR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned
4
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel the sharpness setting...
Touch the [Cancel] key in the screen of step 3.
Downloaded From ManualsPrinter.com Manuals
keys to switch through the screens.
(page 2-111)
(1) (2)
OK
Cancel OK
Soft Sharp
).
Soft
Sharp
Adjust the image.
(1) Touch the [Soft] key or the [Sharp] key.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-113
COPIER
Contents