Sharp MX-2301N Operation Manual page 134

Original
X254 Y210mm
Recall
2
If you wish to edit or clear a previously stored key...
Touch the key that you want to edit or clear. The following screen will appear.
• To edit the key, touch the [Amend] key and go to the next step.
• To clear the key, touch the [Delete] key. Make sure that the original size has been cleared and touch the [OK] key.
(1)
Original
X
X
Y
Y
Recall
(2)
3
You can also touch the
The stored original size will be retained even if the main power is turned off.
To cancel the operation...
Press the [CLEAR ALL] key (
Downloaded From ManualsPrinter.com Manuals
Store/Delete
(2) (1)
(3)
Cancel OK
(25 432)
420
mm
(25 297)
297
mm
Store/Delete
keys to change the number.
).
Store the original size.
OK OK
Auto
(1) Touch the [Store/Delete] tab.
Manual
(2) Touch a key for storing a custom original
Custom
Size
size.
Touch a key that does not show a size (
A custom size has already been stored
in this location.
Cancel Delete Amend
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
Auto
Touch the X (width) numeric value display key to open a
Manual
number entry screen. Enter the width of the original with
Custom
the numeric keys, and touch the [OK] key in the number
Size
entry screen. A dimension from 25 mm to 432 mm (1" to
17") can be entered.
(2) Enter the Y (vertical) dimension of the
original.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. A dimension from 25 mm to 297 mm (1" to
11-5/8") can be entered.
(3) Touch the [OK] key.
2-32
COPIER
).
Contents