Specifying The Original Scan Size And Send Size (Enlarge/Reduce) - Sharp MX-2301N Operation Manual

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. For example, if the
scan size is A4 (8-1/2" x 11") and the send size is B5 (5-1/2" x 8-1/2"), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
☞
STANDARD SIZES
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (Specify using a standard size)
☞
Specifying the original scan size (by numerical values)
Downloaded From ManualsPrinter.com Manuals
Ready to send.
Scan Scan
Mode Switch
A4
Job Detail
Settings
Send Settings
"Scan Size"
"Send Size" is set
to B5
(5-1/2" x 8-1/2")
A4 (8-1/2" x 11")
(page 5-17)
Resend
Send
Address Book
Auto
Address Entry
Special Modes
File
Quick File
Transmission
The image is reduced
to B5 (5-1/2" x 8-1/2")
before transmission
(page 5-53)
(page 5-54)
5-52
SCANNER/INTERNET FAX
Contents