Remote Operation Settings - Sharp MX-2301N Operation Manual

Initial Original Count Setting
This specifies whether or not "Original Count" in the
special functions is enabled for each function.
Touch the [Image Send] key to display the checkboxes
of the fax / image send functions.
To enable this setting, select the checkbox
touch the [OK] key.
Copy
• Copy
Image Send
• Scan
• Internet Fax
• Fax Job
• Data Entry
Document Filing
• Scan to HDD

Remote Operation Settings

Configure settings required for remote operation of the
machine from a computer connected to the same
network.
Remote Software Operation
[Allow Operational Authority] checkbox
To operate the machine by remote operation using
remote software, set to
View Password Entry Screen
When remote software is used to operate the machine
remotely, you can have a
password entry screen appear on the machine, on the
computer, or both.
Touch the [Display in Both PC and MFP] key, [Display
only in PC] key, or [Display only in MFP] key.
Operation from Specified PC
[Allow Operational Authority] checkbox
To use a specific computer to operate the machine
remotely, set to .
Hostname or IP Address of PC
Enter the host name or IP address of the computer that
will connect to the machine.
A maximum of 127 characters can be entered.
View Password Entry Screen
When a specified computer is used to operate the
machine remotely, you can have a password entry
screen appear on the machine, on the computer, or
both.
Touch the [Display in Both PC and MFP] key, [Display
only in PC] key, or [Display only in MFP] key.
Downloaded From ManualsPrinter.com Manuals
and
.
Operation by User who Has Password
[Allow Operational Authority] checkbox
This is used to allow a user who has a password to
operate the machine. For information on the password,
consult your service technician.
To operate the machine by remote operation, set to
View Password Entry Screen
When a user who has a password operates the machine
remotely, you can have a password entry screen appear
on the machine, on the computer, or both.
Touch the [Display in Both PC and MFP] key, [Display
only in PC] key, or [Display only in MFP] key.
7-93
SYSTEM SETTINGS
Contents
.